Range selector

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

94ChevyZ71

Newbie
Joined
Feb 26, 2019
Messages
29
Reaction score
22
Location
Chattanooga, TN
Have a 88 K1500 that had a busted transfer case. It had a manual 241C case and I swapped it out for another 241C but didn’t realize until I had it in that the range selector was a 3 pin instead of a 2 pin like what was originally in the truck. Could I simply swap the vacuum sensor out for one that will plug in to the harness or will that not work since they are different lengths? The black sensor is the 3 pin and the grey is the 2 pin. Thanks
 

Attachments

  • E4E032E4-6F37-4F11-BA0D-26E606866B17.jpeg
    E4E032E4-6F37-4F11-BA0D-26E606866B17.jpeg
    301.8 KB · Views: 7
Top