Opinions on Glowshift, MotorMeter, etc gauges

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

jus10inbrla

I'm Awesome
Joined
May 26, 2018
Messages
1,178
Reaction score
1,018
Location
Baton Rouge
Look what came in today. First priority was confirming i could set milage!!! Will take it for a drive this weekend to make sure gps works. Still got the other 5 gages & all the indicators to buy / install; but its a step.
 

Attachments

  • 107EF0A9-A65E-4599-9BD8-CC06E2476715.png
    107EF0A9-A65E-4599-9BD8-CC06E2476715.png
    1.3 MB · Views: 13

jus10inbrla

I'm Awesome
Joined
May 26, 2018
Messages
1,178
Reaction score
1,018
Location
Baton Rouge
More progress. Im tweaking measurements on particule board til all gauges in then the plan is knock out holes with my slug buster kit piece of 1/8 plate

Also plan is every wire will go to where oem wires were on cluster pinout should i ever have to troubleshoot
 

Attachments

  • 561B53CB-3FF2-44F0-B43F-0E9D913660EF.jpeg
    561B53CB-3FF2-44F0-B43F-0E9D913660EF.jpeg
    267.2 KB · Views: 15

Wildblue19

I'm Awesome
Joined
Jul 21, 2020
Messages
289
Reaction score
703
Location
Lone Star
More progress. Im tweaking measurements on particule board til all gauges in then the plan is knock out holes with my slug buster kit piece of 1/8 plate

Also plan is every wire will go to where oem wires were on cluster pinout should i ever have to troubleshoot
Nice build! We like SpeedHut gauges too which I didn't see listed. If you want to get that dash panel laser cut by us, shoot over a request w/dimensions and we could get one made for you in your material of choice.
 

jus10inbrla

I'm Awesome
Joined
May 26, 2018
Messages
1,178
Reaction score
1,018
Location
Baton Rouge
well plasma cutter is on a jobsite in another state. Buddy who has the waterjet is having PLC issues. So i broke out my electrician slugbuster kit. As much conduit as ive ran; forgot the size of cutter is for od. Not id. Lol. So the 2” gages went smooth thru including the lip. I could technically use the 3” for the 85mm / 3.25”, but it didnt have much wiggle room on lockring.

used the hole saw kit and a dremel for now. Of course it was hella off center. So maybe next month when the indicators finally arrive i can try again! Hoping to order the oil & water gage soon too.
 

jus10inbrla

I'm Awesome
Joined
May 26, 2018
Messages
1,178
Reaction score
1,018
Location
Baton Rouge
5/6 gages arrived. All the dash illuminations came in, but i sent them all back due To poor design. Waiting on refund so i can order better design. I do have my final backplate laid out. The one hole alrdy drilled is for hi beam. there will be 6 other holes above it, for seatbelt, chk eng, battry, park brk, 4wd, & cruise. and of course lt / rt will be on same parallel as main gages.

You must be registered for see images attach
 

jus10inbrla

I'm Awesome
Joined
May 26, 2018
Messages
1,178
Reaction score
1,018
Location
Baton Rouge
The 52mm still have the film on, and the signal indicators were just put on today. But my 85s i jumped the gun / took film off now there scratched … definitly gotta toothpaste shine them before i paint backpanel and do fina install.

molex connectors are completely wired in on truck side.
 
Top