I have a 1989 c2500 5.7 with a th400. Mice have chewed up the wires by the transmission. So i have 3 wires that run from the kickdown solenoid relay . A orange that goes to the kickdown solenoid. A tan-blk and purple that go to a white 4 cavity plug . And another harness by the rear of the engine goes down there to. It has the vss wires that plug into the tail shaft. And then 4 wires on the mating white 4 cavity plug and all the wires were chewed off that plug. Anyone have a diagram so i can repair the wires?