Discussion in 'Offroad Build Threads' started by TheRookie, Jan 25, 2018.
I always liked pulling the bed myself.
That's what I've done twice, but it's still a pain because I don't have anyway to lift it by myself.
i usually make a gantry out of 2x4's and use ratchet straps or something to lift
Out with the old and in with the new. I wound up heat shrinking the wire connectors and wrapping everything with conduit and electrical tape.
I was trying to be somewhat professional.
At any rate, This was a pain in the rear! I might try taking the bed off in the future. Thanks for the advice.
In the future try not to use the plain ol vinyl electrical tape. it turns to a gooey mess around fuel oil and heat. they make a harness tape for that. just google fleece tape.
Separate names with a comma.