My 97 silverado

[Joeyk94]

What's going on guys. My name is Joey. Recently my dad bought aaa new silverado and gave me his old one. He's had this truck since I was 3 years old so it family to me and as I write this I'm sitting in the truck In front of my house spending some quality time with it. Well as the truck sits right now it's on 35 inch pro comp m/t and 15x9 eagle alloy rims with a fabtech 6 inch lift up front and Fabtech add a leaf with 2 inch blocks out back. With a 3 inch body lift. The drive train is pretty much all stock except for the e3 plugs accel extreme 9000 wires k&n air filter and flowmaster 50 series single 3inch exhaust a few months back the lower ball joint gave as we were getting ready to leave the lake so we towed it home and replace both uppers, lowers, springs, sway bar bushings, end links, and tie rods. But then a few weeks later the lower arm ball joint mount on the passenger side was letting it slip so I bought another arm and put on and now it's all fixed and working good

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[95C1500]

welcome aboard Joey! and holy stuffed!

 

[Joeyk94]

Thank you and her some more of my 2 favorite family members the boat has been around since I was like two and turn into my project boat when I started high school

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[95C1500]

upper corner mod is a nice touch!

 

[Joeyk94]

Thanks
Theirs also blue LEDs in the grill and under each fender just need to finish wiring them up
The next few things I want to get are tow mirrors new headlight housings and led backup lights

 

[Joeyk94]

Tomorrows project is to wire high and lows together and thanks to this site I finally figured out how to do it. Thank you guys. And it eventually going to have hids so should I wire another relay for that while I'm at it

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[1997k1500Calvin]

Link to the high four mod

Tapatapatalk

 

[98GMC]

Truck looks awesome. I have never tried but I still cant figure how 15" rims fit over our brakes. Did you mod the caliper or smaller rotor or something?

 

[Gopedxr]

That trucks awesome! Looks like mine i got the same uppes and i had a lower ball joint also break the other week haha! Going to do the same thing you did rebuild my front end. Were did you get the sway bar bushings and straps? I lost mine it came off and the bushing slid down the wheel. Thanks! also curious about the leds in the fenders?

 

[thunderstruck]

Welcome!

welcome aboard Joey! and holy stuffed!

Pretty sure that was a pic of when the ball joint failed.