Motorcycle wheel chock for trailer - Pingel brand, removable

[someotherguy]

I know we have some scooter riders here.. this is a nice piece that I just don't need anymore.

Pingel brand motorcycle trailer wheel chock, sturdy made in USA and super easy to use. Wide design works great with cruisers, sport bikes, or any other setup.

Set it at the front of your trailer and mark/drill 4 small holes, bolt in the mounts with the supplied hardware. The chock then slides right into the mounts, roll your front wheel into it and strap your bike to the trailer. When you don't need the chock it slides right back out with no tools needed and the mounts are low profile so they don't interfere with using the trailer to carry other items.

I have used it many times and it works great! Ready to install: chock, mounts, bolts, nuts, and large thick washers. These are currently ***$156*** new so save money and buy mine which is in great shape! Only $50.

See pics of it mounted on my old trailer. Sold my bike, sold the trailer, don't need the chock anymore.

Pickup local in NW Houston TX or ship for actual cost (it's a little large but not heavy.)

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Richard

 

[Scooterwrench]

I never knew Pingle made anything but high flow petcocks. Mandatory on anything with an S&S or Mikuni HSR carb on it.

 

[rebelyell]

I never knew Pingle made anything but high flow petcocks. Mandatory on anything with an S&S or Mikuni HSR carb on it.

Until now, I also mistakenly believed fuel valves only.
Seems that Pingel wheel chock's about $160 --- it's same company

http://www.pingelonline.com/pc_combined_results.asp?search_cat=searchexact~pcpcm.parent_pc_id~8B2303CAFDD94A9FBFF86B666A64E350&pc_id=8B2303CAFDD94A9FBFF86B666A64E350

 

[someotherguy]

Until now, I also mistakenly believed fuel valves only.
Seems that Pingel wheel chock's about $160 --- it's same company

http://www.pingelonline.com/pc_combined_results.asp?search_cat=searchexact~pcpcm.parent_pc_id~8B2303CAFDD94A9FBFF86B666A64E350&pc_id=8B2303CAFDD94A9FBFF86B666A64E350

They've gone up a LOT. Last time I looked they were about $75 new. I see the current $156 price has different mounting hardware, and that hardware kit sold separately is $89.

Makes mine a bargain at $50! I just realized I copied my ad from my FB listing and failed to include the price, need to go back and edit the initial post.

Richard

 

[Scooterwrench]

They've gotten stupid with they're fuel valve prices too. I used to buy those for $70 retail and it wasn't that long ago either.