LM7 5.3 build on a 1995 GMC

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

CodyLehman

Newbie
Joined
Aug 30, 2021
Messages
1
Reaction score
0
Location
Tennessee
So I just purchased a running 5.3 with 113k on it out of a wrecked truck. Harness and computer was included. I have a general idea on what build I’m wanting to do, however any recommendations would be appreciated. Not trying to build a race truck or anything, but would like to open it up a bit. Any tips or tricks would be awesome to hear though. Truck currently is a 5.7 4x4 btw.

Main concern I have right now is with the harness.

This will be my first full swap, and not just fooling with bolt on’s. So drop some recommendations if you don’t mind.

Thanks in advance.
 

MrPink

Bainisteoir Páirteanna
Joined
Jan 12, 2021
Messages
1,654
Reaction score
3,351
Location
Saginaw Mi
If the motor is healthy leave it be and just do a cam, valve springs, headers and a tune, you can gain up to 100hp from just a cam swap. And a competent tuner can squeeze a bit more out. I myself have plans for either a 5.3L or a 6.0L but my motor will be stock, with a turbo cam, and a decent turbo setup, I personally am aiming for 600hp or there about.

what do you plan on doing for transmission control? Being that we boh have 1995's my option is to swap to a newer 4L80. But that is me, I couldn't find any real solid info of if the 95 trans could be controlled by the 0411 ECM or not.
 

BPR Speed

OBS Enthusiast
Joined
Aug 9, 2020
Messages
72
Reaction score
73
Location
virginia
We would need to know how you intend to use the truck, power goals for the truck on it's end purpose, tire size, axle ratio, and lift to really nail down and honest cam choice. I do have a few LS's out there running around with the Sloppy Stage 2 cams for sound and the bigger Texas Speed Stage 3 cams. Both of these cams like 3000 RPM stall converters on them but feel like they need a lot of pedal pushing to get any torque for daily driving out of them. This is due to the power band being push up and the duration being past the 230-240's range.

Honestly a cam that surprised me the most for a working truck low duration (low 200's duration) was a 98' LS1 cam behind a stock 2003 4L60e converter and transmission. We added a firmer shifting servo kit (corvette servo) to it and added PAC 1218 racing springs to the 243 heads. The engine was completely rebuilt when we placed it all together and at it's current state it'll bark the tires into a 3rd gear shift running 22" wheels through a G80 axle on a C1500 frame truck. It'll walk right up to 80 mph without you even noticing it did so on a on-ramp. Shift kit will throw you in your seat and it's an honest 330hp set up to the wheels at best. It still feels and tows great for the set up without compromising a cam shaft that puts you in the hot rod gas guzzler range. The owner brags of a 22 mpg highway average btw!
 

Staff online

Forum statistics

Threads
78,084
Messages
1,644,801
Members
81,215
Latest member
wesco1974
Top