keyless entry wiring questions

Discussion in 'Audio + Electronics' started by Treyes, Aug 2, 2020.

  1. Treyes

    Treyes Newbie

    Messages:
    48
    Likes Received:
    11
    Joined:
    Dec 13, 2019
    Location:
    Dallas
    I have a 92 c1500 and im trying to put a keyless entry with power locks and everything but its manual everything so it doesn’t have anywhere to run the wires to doors and im not sure what to do so if any of yall have gone through it and can show me what y’all did that’d be appreciate.
     
  2. SUBURBAN5

    SUBURBAN5 I'm Awesome

    Messages:
    266
    Likes Received:
    296
    Joined:
    Jul 18, 2020
    Location:
    Houston
    What keyless entry kit did you buy? (Lmc, viper, walmart,pawn shop, ect)
     
  3. Treyes

    Treyes Newbie

    Messages:
    48
    Likes Received:
    11
    Joined:
    Dec 13, 2019
    Location:
    Dallas
    I dont think its important but its just one $50 kit i bought from amazon not sure of the brand but the reviews were good
     
  4. SUBURBAN5

    SUBURBAN5 I'm Awesome

    Messages:
    266
    Likes Received:
    296
    Joined:
    Jul 18, 2020
    Location:
    Houston
    Technically doesn't jw though because lot of them come with directions and routes to take for install. If not the case, if it was me I would take the boots off a stock equipped one and drill the holes so the boot fits and run the wires from the door in to dash. Or if it's easier dash to door. I can send some picks of mine so you can get an idea. Yours being a 92 is a different trim and layout then mine, but at least you could see how gm routed the wires.
     
  5. SUBURBAN5

    SUBURBAN5 I'm Awesome

    Messages:
    266
    Likes Received:
    296
    Joined:
    Jul 18, 2020
    Location:
    Houston
    Also as a universal tip. LMC has a video on youtube of a square body getting power windows. And they showed how they routed it in there's.
     
  6. Treyes

    Treyes Newbie

    Messages:
    48
    Likes Received:
    11
    Joined:
    Dec 13, 2019
    Location:
    Dallas
    Yeah if you could leave some pictures that’d be great
     
  7. Treyes

    Treyes Newbie

    Messages:
    48
    Likes Received:
    11
    Joined:
    Dec 13, 2019
    Location:
    Dallas
    Ill make sure to check it out thanks for the help
     
  8. SUBURBAN5

    SUBURBAN5 I'm Awesome

    Messages:
    266
    Likes Received:
    296
    Joined:
    Jul 18, 2020
    Location:
    Houston
    Anytime, soon as I make it to the store I'll send some pics
     
  9. SUBURBAN5

    SUBURBAN5 I'm Awesome

    Messages:
    266
    Likes Received:
    296
    Joined:
    Jul 18, 2020
    Location:
    Houston
    This is the boot. Behind the hood release trim is hollow

    20200802_125350.jpg

    20200802_125358.jpg
     
  10. Dropped88

    Dropped88 I'm Awesome

    Messages:
    216
    Likes Received:
    261
    Joined:
    Dec 25, 2017
    Location:
    Georgia
    Could also do a p/w p/l conversion from a donor and then tap into that wiring seems alot easier and takes out alot of the guesswork

    If not did your kit come with lock actuators and what do they look like. Or possibly a link to see what you got
     

Share This Page