K2500 LCA help identifying this piece

[Caman96]

Where'd you hear about Astro control arms? You can use their knuckles for upgraded front brakes on a 1500, but I don't see how a van control arm would be remotely compatible with a 2500.

Multiple people on this forum recently have been doing this. I forget which year, but it’s AWD and LCA’s are same. I’ll try and find the thread.

Here’s one, go to post #113.

Front Lower Control Arms

i found this yesterday,besides making a bracket could be a solution for those who want forged arms!

www.gmt400.com

 

[Supercharged111]

Multiple people on this forum recently have been doing this. I forget which year, but it’s AWD and LCA’s are same. I’ll try and find the thread.

Here’s one, go to post #113.

Front Lower Control Arms

i found this yesterday,besides making a bracket could be a solution for those who want forged arms!

www.gmt400.com

I guess the next question is what's better about them?

 

[Caman96]

Not better, just available for some who need them. Low cost new LCA’s with new bushings already pressed in.

 

[Supercharged111]

Not better, just available for some who need them. Low cost new LCA’s with new bushings already pressed in.

Do they not make them marked for our trucks?

 

[Caman96]

Do they not make them marked for our trucks?

Not that I know of.

 

[TommyJ1980]

You must be registered for see images attach

 

[TommyJ1980]

You must be registered for see images attach

Where'd you hear about Astro control arms? You can use their knuckles for upgraded front brakes on a 1500, but I don't see how a van control arm would be remotely compatible with a 2500.

 

[TommyJ1980]

It was on a different thread. I was surprised too but they worked, and all the fittings are in the right place. I’m just grateful I’m going to be back driving again soon after all this. It was like hell trying to get them to fit into the bushings, my son jacked it up and I had to cajole them into place. all’s well that ends well though. Very very much appreciate this site as a resource. I thought the parts guys at the store could give good advice on stuff like this but not so.

 

[TommyJ1980]

You must be registered for see images attach

 

[TommyJ1980]

You must be registered for see images attach