Outlaw910
Newbie
Super clean truck!!
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
It started out with the DJM 2” springs with their tubular upper and lowers and flip kit in the rear.
The truck didn’t have the rake and ride I was looking for so that’s why I went with the coil overs. The coil overs actually dropped the front ride height another inch so is probably closer to a 5” drop.
Hope that helps....
That's about identical to mine! 90 white stepside. What are the backspacing and offset of the wheels, if you don't mind? I'm looking to do a similar setup on mine, but probably 15's up front. Worried about fitment as I have a 4/6 drop as wellYou must be registered for see images attach15x8 with 275/60-15 rear
17x4.5 with 27-6 front
Also just put some QA1 coil overs on it.
Rides much nicer in the front end.
That's about identical to mine! 90 white stepside. What are the backspacing and offset of the wheels, if you don't mind? I'm looking to do a similar setup on mine, but probably 15's up front. Worried about fitment as I have a 4/6 drop as well
Awesome, thanks! Any fitment issues?The back are 4.5 and the fronts are 1.75
Awesome, thanks! Any fitment issues?
What backspacing did you use on those. Looks great BTW.You must be registered for see images attach15x8 with 275/60-15 rear
17x4.5 with 27-6 front
Also just put some QA1 coil overs on it.
Rides much nicer in the front end.
What backspacing did you use on those. Looks great BTW.