installing factory Fender flares on a wt truck?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Jeremy D

Newbie
Joined
Oct 9, 2022
Messages
19
Reaction score
8
Location
albion maine
So I'm in need of a new bed for my truck (1995 K2500 Silverado) and I was wondering how to put the factory fender flares on a bed that did not originally have them( bed I'm looking at is off of a WT) how would I do this and is it possible, thanks in advance
 

Nad_Yvalhosert

I'm Awesome
Joined
Oct 11, 2016
Messages
1,666
Reaction score
2,085
Location
Rochester, NY
In the 400 Chevy/GMC's beds are beds. The wheel well design doesnt differ between Scottsdale, Cheyenne, Silverado, or W/T trim. Fleetside short or long use the same part. There are no factory flares for stepside or duallys.

The installation depends on design. They drill and screw to the inner lip.
 

packer0440

I'm Awesome
Joined
Oct 10, 2021
Messages
247
Reaction score
312
Location
Cleveland, OH
If they are true factory flares there are studs that are a part of the flare that go into the face of the bed. From what I’ve seen they don’t come out so you’d probably have to drill holes in just the right spot on the bed. Reproduction ones might not have those studs and you’d do as described above.
 
Top