INFO PLEASE 93 suburban sheetmeatl

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Guss327

Newbie
Joined
Feb 21, 2019
Messages
27
Reaction score
1
Location
new jersey
Hi looking for information on sheet metal replacement for my 93 suburban.
looking for the piece off metal that's on back of vehicle behind the lower tailgate that the bar spring and hinge is welded to . it runs left to right at back of bed floor but just underneath the end of bed floor.
I would just rather replace the whole piece than patch the hole. I was looking for a place that might sell it but had no luck. thought it was a good place for this information I hope.
Great site with Great information.
Thanks in advance !
 

Guss327

Newbie
Joined
Feb 21, 2019
Messages
27
Reaction score
1
Location
new jersey
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 

Hipster

I'm Awesome
Joined
Mar 7, 2017
Messages
3,388
Reaction score
5,853
Location
Liberty, NC
Rusting from the inside out. Rusted and crusty under that black tape or whatever that is? Think you're going to need a J/y piece.
 

Hipster

I'm Awesome
Joined
Mar 7, 2017
Messages
3,388
Reaction score
5,853
Location
Liberty, NC
Junk yard/ salvage yard = J/Y or someone parting one out on Craigslist you can cut the piece out of.
 

Guss327

Newbie
Joined
Feb 21, 2019
Messages
27
Reaction score
1
Location
new jersey
Oh yeah ok .
I would love if someone made this new Like all the other patch panels everyone makes. I have looked in my yards but age n in northeast all way worse. Keep looking.
 
Top