How much has it been lowered?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

TagAllen

I'm Awesome
Joined
Mar 27, 2014
Messages
198
Reaction score
92
I purchased a used 95 short bed regular cab. It was lowered when the previous owner purchased it. Where can I measure to figure out how much it has been lowered? I know I could measure from anywhere to the ground but that does not take into consideration differences in tires. I see the rear has lowering shackles to the point the rear of the springs nearly touch the bed floor. I have not pulled the front wheels to see how the front is completed.
 

gearheadE30

I'm Awesome
Joined
Oct 6, 2016
Messages
231
Reaction score
212
Location
Columbus, IN
Measure from the center of the hub to the fender lip. That takes tire pressure and diameter out of the equationand will get you pretty close.
 

LD68

OBS Enthusiast
Joined
Jul 27, 2019
Messages
56
Reaction score
33
Location
middle tn
I am not the OP but just lowered my 94 ecsb. What are stock measurements from center hub to fender lip?
 

east302

I'm Awesome
Joined
Oct 4, 2013
Messages
3,416
Reaction score
3,138
Location
Jackson, MS
Here are the measurements from a 98 manual, I’d think it would be the same for a 94. Maybe it will help.

.
You must be registered for see images attach



Sent from my iPhone using Tapatalk
 

TagAllen

I'm Awesome
Joined
Mar 27, 2014
Messages
198
Reaction score
92
Measure from the center of the hub to the fender lip. That takes tire pressure and diameter out of the equationand will get you pretty close.
Ah good idea. I will post when I have the chance to measure. Thank you.
 

jgreen16

I'm Awesome
Joined
Jul 23, 2019
Messages
121
Reaction score
166
Location
Ohio
Appears to be a 2/4 drop.
My '97 on the same, with 17's.

You must be registered for see images attach

What are the specs on the 17's package you have on your '97? I like the look a lot!
 
Top