Riggormotor2222
Newbie
So I'm looking for some opinions on what to do to get my camber closer to being straight on my 2wd 1998 chevy c1500. I installed 3" coil spacers, 4" lift shackles, aftermarket control arms up front. I also replaced all the ball joints and tie rod ends. I've already punched out the tabs for adjusting the upper control arms further. I adjusted the upper control arms all the way in. I also installed 2" ball joint spacers thinking this would fix the problem but still is way out. It seemed like it was straight when I didn't have the ball joint spacers but the control arms were resting on the frame. So I'm wondering if anyone has dealt with this problem and maybe give me some insight? Maybe I should have gotten the 1" spacers instead of 2" or if I should just cut my down a half inch. Please let me know I'd like to get this thing done with and driving straight down the road