limited2k
Newbie
I'll bet if you look at the spindles they're stockers and someone just cut or torched the springs; it'll be pretty easy to tell. Here's a pic of a stock spindle and 2" drop spindle side by side; note where the axle stub is located in relation to the tie rod connection. Stock spindle on left, axle is very low; drop spindle on right has it closer to the center, accomplishing the 2" of drop:
You must be registered for see images attach
If that's the case, the simple solution is replace the stock spindles and cut springs with 2" spindles, 2" springs, and you're set.
Richard
Yeah, I'm going to have to check out what's on the truck to be sure what directions I need to go in. Thank you for your help and the picture to show the differences.