Help needed ASAP. 99 4.8 in 94 c1500

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Joined
Apr 3, 2020
Messages
31
Reaction score
13
Location
Abbeville
I had the computer flashed and it will start and idle. However when I attempt to press the gas pedal it revs up a couple 100 RPM then falls flat on its face. I can unplug the throttle position sensor (brand new) and same thing happens. It's almost if the ECU isnt communicating with sensors to increase fuel flow.

Customer dropped this car off in shambles. I would be happy to donate $100 to anyone who can correctly figure out issue.

I can upload videos or more pictures just let me know what you would like to see.
You must be registered for see images attach


Attached is a picture of how the wiring harness was left to me.
 
Last edited:
Joined
Apr 3, 2020
Messages
31
Reaction score
13
Location
Abbeville
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 
Joined
Apr 3, 2020
Messages
31
Reaction score
13
Location
Abbeville
Above are some of my nightmare fun.

Does anyone have a diagram of the grounding locations in the engine bay and out of harness? (My Drive with Alldata took a crap and new one isnt here yet.)
 
Joined
Apr 3, 2020
Messages
31
Reaction score
13
Location
Abbeville
Here are some more pictures to help paint the picture.
You must be registered for see images attach
You must be registered for see images attach
 
Top