Hello from Middle TN

[kennythewelder]

Welcome to the forum.

 

[vr1967]

Where in Mid Tenn? Just got back from there last night. We mostly stay in Lawrence and Giles Counties, but this time we were up around Pall Mall and Byrdstown on the KY border above Cookeville.

Saw a very nice 99-00 CCSB dually just north of McMinnville.

 

[Steve Cunningham]

Hey there Nick, welcome to the forum. I like your truck.

 

[Shane B]

Welcome from AZ!

 

[Erin]

That's called water witching here!

Witching sticks, or divining rods around here.

 

[PlayingWithTBI]

We used a well witcher in CA years ago to find more water for a well in a 25 acre pistachio orchard. He used bare brass rods for brazing bent like an "L", holding them out horizontally. He walked around until they started pulling together, and when they crossed each other, there was water. He could find "streams" underground and the spot they cross over each other. Then he took a long pole, had his wife time it. The pole would start bouncing up/down violently then, when it stopped, he said "Mark" and kept going for about 10 minutes. He said every second it bounced was 10' deep and each time he said mark was a stream crossing that spot. After it was over he said we'd get so many gallons/minute if we drilled right here (it was like the 3rd tree in, and 10 rows from the edge) and so many feet deep. We drilled there and got what he said. It works! He taught me how to find buried pipe lines. That works too as long as the water is moving inside the pipeline!

Anyway, Your fuel pump (EP381) is a good choice but, you'll want to wait on the 18LB spring until you get the cam, heads, and capability to tune. With an AFPR you can get your pressure down to ~15 PSI to run the stock TB