Heater issue- Always hot no cold air

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

djss

Newbie
Joined
May 18, 2021
Messages
3
Reaction score
1
Location
Dublin Virginia
I have a 1991 with ac and the electronic controls, the little green arrow goes from hot to cold just like it should, but it always blows hot air. I took the actuator out and it works like it is supposed to, but when i put it back together it doesnt work. I can move the blend door by hand with the actuator removed and it changes from hot to cold. I am not sure why its not working.

Any thoughts would be greatly appreciated.

Thanks
 

AK49BWL

GMT400 Forever!
Joined
Mar 21, 2015
Messages
2,239
Reaction score
3,625
Location
Longview, TX
Check the actuator's large gear for cracks. It can appear to work when no torque is needed and then fail when installed. Tho generally they fail in the cold position because the temp door is not counterweighted, so the motor works harder to move towards the heat setting. Does the door move freely in the box?
 

Latest posts

Forum statistics

Threads
78,095
Messages
1,644,980
Members
81,233
Latest member
Bayas
Top