Handling difference with mud tire and 18”

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

east302

I'm Awesome
Joined
Oct 4, 2013
Messages
3,597
Reaction score
3,611
Location
Jackson, MS
Our son has a 98 K1500 with 18” rims that the previous owner installed. It had bald BFG ATs and a shot steering system.

I just put on a set of 285/65r18 Nitto trail grapplers and have a question about how they “should” handle versus a stock 16” AT tire as I have zero experience with it.

It’s barely noticeable, but compared to a 16” all terrain on my other two trucks it is slower to return to center after turning. The steering just feels heavier in general.

Over the last few months, I’ve replaced...

Steering gear (Bluetop)
Center link, tie rods, pitman arm, idler arm and bracket, upper and lower ball joints on both sides (all Moog problem solver)

I had a shop align it and it tracks straight but I have so little faith in any shops that I second guess everything now.

The only thing I can think of is a steering gear issue or power steering issue or that it’s just how these feel. Pump is of unknown age and I’ve had a Bluetop gear before and am hesitant to condemn it.

Can alignment impact return to center turning? Anything else that I can check?

Before I go back to the alignment shop, I’d like to get the opinion of others that have larger more aggressive tires. Maybe this is just the nature of the beast and I’m not used to it.
 

df2x4

4L60E Destroyer
Staff member
Moderator
Joined
Mar 1, 2012
Messages
11,564
Reaction score
14,124
Location
Missouri
Is the EVO steering in this truck still functional?

My Suburban's steering definitely felt heavier when I had 18"s on it, but I don't recall any issues with returning to center.
 

east302

I'm Awesome
Joined
Oct 4, 2013
Messages
3,597
Reaction score
3,611
Location
Jackson, MS
Is the EVO steering in this truck still functional?

My Suburban's steering definitely felt heavier when I had 18"s on it, but I don't recall any issues with returning to center.

EVO is still there. By heavier, do you mean sticky? As in, more grippy? Complete word salad on my part, lol.


Sent from my iPhone using Tapatalk
 
Last edited:

east302

I'm Awesome
Joined
Oct 4, 2013
Messages
3,597
Reaction score
3,611
Location
Jackson, MS
@SUBURBAN5

I accidentally created two threads on this but saw you replied to the other thread.

Does power steering feel good at a dead stop as you turn either way? Or does it bind up?

Power steering feels fine and no binding. I have two other 98 4x4 models - an extended cab truck and a two door Tahoe both with 285/75/16. It feels comparable to them except for the return to center.

It’s just something that I notice and something that I’ve never noticed on the other two with stock tires.

It’s like the tires are too sticky to get back to center without help. That’s the best way I can think of to describe it.


Sent from my iPhone using Tapatalk
 

df2x4

4L60E Destroyer
Staff member
Moderator
Joined
Mar 1, 2012
Messages
11,564
Reaction score
14,124
Location
Missouri
EVO is still there. By heavier, do you mean sticky? As in, gripper? Compete word salad on my part, lol.


Sent from my iPhone using Tapatalk

Yeah, I guess grippier would be a good way to describe it. Just felt like everything took a little more effort than with factory wheels and tires.

Are you sure the EVO isn't stuck in full boost? Failing to return to center is a common symptom of that.
 

east302

I'm Awesome
Joined
Oct 4, 2013
Messages
3,597
Reaction score
3,611
Location
Jackson, MS
Yeah, I guess grippier would be a good way to describe it. Just felt like everything took a little more effort than with factory wheels and tires.

Are you sure the EVO isn't stuck in full boost? Failing to return to center is a common symptom of that.

I’ve had a bad EVO sensor a few times and it felt like hitting a patch of ice on a curving road. Not sure if that is similar to the full boost or not?
 

df2x4

4L60E Destroyer
Staff member
Moderator
Joined
Mar 1, 2012
Messages
11,564
Reaction score
14,124
Location
Missouri
I’ve had a bad EVO sensor a few times and it felt like hitting a patch of ice on a curving road. Not sure if that is similar to the full boost or not?

In my experience the column sensors fail in one of two ways. The occasional "patch of ice" feeling you described usually comes first, then eventually they'll fail completely which leaves the system in full boost at all times just like if the sensor was unplugged.

If you think this might be a possibility with this truck try unplugging that sensor. If nothing changes, there's a good chance the sensor is dead IMO. If the steering gets lighter and the returning to center issue gets worse, then there's probably something else going on.
 

east302

I'm Awesome
Joined
Oct 4, 2013
Messages
3,597
Reaction score
3,611
Location
Jackson, MS
In my experience the column sensors fail in one of two ways. The occasional "patch of ice" feeling you described usually comes first, then eventually they'll fail completely which leaves the system in full boost at all times just like if the sensor was unplugged.

If you think this might be a possibility with this truck try unplugging that sensor. If nothing changes, there's a good chance the sensor is dead IMO. If the steering gets lighter and the returning to center issue gets worse, then there's probably something else going on.

That’s an easy check, thanks!


Sent from my iPhone using Tapatalk
 

df2x4

4L60E Destroyer
Staff member
Moderator
Joined
Mar 1, 2012
Messages
11,564
Reaction score
14,124
Location
Missouri

df2x4

4L60E Destroyer
Staff member
Moderator
Joined
Mar 1, 2012
Messages
11,564
Reaction score
14,124
Location
Missouri
Return to center should purely be a function of your (in question) alignment and freedom of movement of ball joints and tie rods.

I guess I should clarify a little bit. Over-boosted steering due to a failed or unplugged column sensor won't completely prevent the wheel from returning to center, but it can slow the process to a point where it feels "off" especially at certain speeds. For example making a slow 90 degree turn at 10-15MPH you may have to help it back to center a little.
 

Nad_Yvalhosert

I'm Awesome
Supporting Member
Joined
Oct 11, 2016
Messages
2,604
Reaction score
3,981
Location
Rochester, NY
The caster angle is responsible for return to center. The higher positive caster, the better highway manners, and better returablilty.
Less caster, more wander, easy steering.
But definitely check for binding ball joints and tie rods.
 

Pinger

I'm Awesome
Joined
Mar 10, 2020
Messages
4,183
Reaction score
9,605
Location
Scotland.

boy&hisdogs

I'm Awesome
Joined
Mar 2, 2012
Messages
687
Reaction score
1,008
Location
Eastern WA
Do the new wheels and tires stick out much farther than stock? That would make the steering feel a little sluggish.

But fix the things that are for-sure broken first, like the steering components and alignment.
 

Pinger

I'm Awesome
Joined
Mar 10, 2020
Messages
4,183
Reaction score
9,605
Location
Scotland.
Not just castor but trail, KPI and offset also affect self centering. As overall wheel/tyre diameter impacts on most of those factors, it does too. Front anti roll (sway) bar can also.
 

east302

I'm Awesome
Joined
Oct 4, 2013
Messages
3,597
Reaction score
3,611
Location
Jackson, MS
Do the new wheels and tires stick out much farther than stock? That would make the steering feel a little sluggish.

But fix the things that are for-sure broken first, like the steering components and alignment.

Yes, I should’ve mentioned that. I don’t know what width the rims are (they aren’t GM rims) but the tires stick out probably 1-1.5” more than stock. I don’t like them at all.

Nothing is obviously binding when watching from underneath and everything was torqued to spec.
 

Supercharged111

Truly Awesome
Air Force SpaceX Member
Joined
Aug 20, 2015
Messages
17,039
Reaction score
27,019
Location
Da U.P.
Not just castor but trail, KPI and offset also affect self centering. As overall wheel/tyre diameter impacts on most of those factors, it does too. Front anti roll (sway) bar can also.

What's trail? KPI is pretty well fixed. I suspect it greatly leads caster in these rigs.
 

Pinger

I'm Awesome
Joined
Mar 10, 2020
Messages
4,183
Reaction score
9,605
Location
Scotland.
What's trail? KPI is pretty well fixed. I suspect it greatly leads caster in these rigs.

To visualise trail - look at the (virtual) king pin and see the castor slope. Now move the entire 'pin' forwards. That's trail - like a supermarket trolley wheel has.

KPI is fixed - true. But I think the longer 'footprint' of a larger diameter tyre magnifies its effect.

There's a mix of forces acting to self centre steering and their effects vary depending on what the truck is doing. Some are dependant on the grip at the road surface, others the weight on the wheels (eg, less with aerodynamic lift at speed).
 

Supercharged111

Truly Awesome
Air Force SpaceX Member
Joined
Aug 20, 2015
Messages
17,039
Reaction score
27,019
Location
Da U.P.
To visualise trail - look at the (virtual) king pin and see the castor slope. Now move the entire 'pin' forwards. That's trail - like a supermarket trolley wheel has.

KPI is fixed - true. But I think the longer 'footprint' of a larger diameter tyre magnifies its effect.

There's a mix of forces acting to self centre steering and their effects vary depending on what the truck is doing. Some are dependant on the grip at the road surface, others the weight on the wheels (eg, less with aerodynamic lift at speed).

The way you describe trail sounds exactly like caster?
 

Pinger

I'm Awesome
Joined
Mar 10, 2020
Messages
4,183
Reaction score
9,605
Location
Scotland.
The way you describe trail sounds exactly like caster?

At the ground it pretty much is. But by using trail the same effect can (theoretically) be had with a vertical king pin axis - if that is desirable!
I think it's use is in combination with caster to lessen king pin angle (in side elevation view) as caster creates effects due to weight. If it is used at all these days, it is in very small amounts.
 

Forum statistics

Threads
78,135
Messages
1,645,631
Members
81,337
Latest member
1998SierraCCZ71
Top