E-Force Supercharger 1552

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Wheeler

OBS Enthusiast
Joined
Apr 17, 2019
Messages
89
Reaction score
95
Location
Canada
@L31MaxExpress I have researched your comment in my other thread for a while now…
I have found a new Edelbrock E-Force Supercharger! However it’s $3800 after tax! Plus install & the MSD Boost Retard Box… so this will run me about 7k for everything. Good ole Canada for ya!

So my quest for MORE POWER for towing has lead me down this rabbit hole. I can’t find anyone with this exact SC & limited videos on YouTube. However all I read is awesomeness about a positive displacement SC for towing. So before I pull the pin drop 7k I wanted all comments/advise/ or anyone that HAS one to chime in..

Now please guys keep in mind, EVERYTHING is A LOT more $$ than the states…

For those who don’t know my set up is..
383 Stroker. 9-5-1. Fast Burn Heads. ZZ4 cam. RPM Performer intake & Edelbrock 750 carb. 1 5/8 long tubes. Electric Fan. FAST tranny controller, plus more… oh rite 4.56 gears. 295/75/17s.

I tow 7k or more. It put down 250rwhp & 330rwtq at 3k. All I do is really tow with the truck.
 

L31MaxExpress

Truly Awesome
Joined
Apr 21, 2018
Messages
10,966
Reaction score
18,965
Location
DFW, TX
There's an E-Force blower for the small block?! Got a link?
Edelbrock has the same design as the old Magnusun setup. Its for a 4bbl application and comes with a built-in bypass valve. Takes 1/2 hp to turn at 60 mph. A 350 making 500+ @ 10 psi was not uncommon with the Magnusun.
 

Supercharged111

Truly Awesome
Air Force SpaceX Member
Joined
Aug 20, 2015
Messages
17,036
Reaction score
27,010
Location
Da U.P.
Edelbrock has the same design as the old Magnusun setup. Its for a 4bbl application and comes with a built-in bypass valve. Takes 1/2 hp to turn at 60 mph. A 350 making 500+ @ 10 psi was not uncommon with the Magnusun.

I feel like an E Force would be intercooled though. Can't find it on their site.
 

Anubis

I'm Awesome
Joined
May 15, 2019
Messages
174
Reaction score
223
Location
West Michigan
@L31MaxExpress
all I read is awesomeness about a positive displacement SC for towing. So before I pull the pin drop 7k I wanted all comments/advise/ or anyone that HAS one to chime in..

I tow 7k or more. It put down 250rwhp & 330rwtq at 3k. All I do is really tow with the truck.
[/USER]
[/QUOTE]
We swapped a ZL1 into my brothers avalanche. If you’re not familiar with the ZL1 it’s a supercharged 6.2 LS engine with a stock rating of 650 hp / 650 torque. We put a smaller pulley on the blower to increase the boost and it is a BEAST. We built the truck as a daily driver with air conditioning and for the sand dunes. When you give it the onions the blower definitely lets you know that it’s there. The sound is awesome if you’re into that kind of thing. Anyway, he tows A few large camper trailers with it and says the fuel mileage is horrible because it is always in the boost. I don’t know how much homework you’ve done but you could probably spend less than $7000 for a naturally aspirated engine that would exceed your expectations and get better fuel mileage.
 

Supercharged111

Truly Awesome
Air Force SpaceX Member
Joined
Aug 20, 2015
Messages
17,036
Reaction score
27,010
Location
Da U.P.
We swapped a ZL1 into my brothers avalanche. If you’re not familiar with the ZL1 it’s a supercharged 6.2 LS engine with a stock rating of 650 hp / 650 torque. We put a smaller pulley on the blower to increase the boost and it is a BEAST. We built the truck as a daily driver with air conditioning and for the sand dunes. When you give it the onions the blower definitely lets you know that it’s there. The sound is awesome if you’re into that kind of thing. Anyway, he tows A few large camper trailers with it and says the fuel mileage is horrible because it is always in the boost. I don’t know how much homework you’ve done but you could probably spend less than $7000 for a naturally aspirated engine that would exceed your expectations and get better fuel mileage.
[/QUOTE]

What is he getting? My 1500 is in the 7 range, dually gets as bad as 5.5 but is usually closer to 7 as well.
 

Anubis

I'm Awesome
Joined
May 15, 2019
Messages
174
Reaction score
223
Location
West Michigan
We swapped a ZL1 into my brothers avalanche. If you’re not familiar with the ZL1 it’s a supercharged 6.2 LS engine with a stock rating of 650 hp / 650 torque. We put a smaller pulley on the blower to increase the boost and it is a BEAST. We built the truck as a daily driver with air conditioning and for the sand dunes. When you give it the onions the blower definitely lets you know that it’s there. The sound is awesome if you’re into that kind of thing. Anyway, he tows A few large camper trailers with it and says the fuel mileage is horrible because it is always in the boost. I don’t know how much homework you’ve done but you could probably spend less than $7000 for a naturally aspirated engine that would exceed your expectations and get better fuel mileage.

What is he getting? My 1500 is in the 7 range, dually gets as bad as 5.5 but is usually closer to 7 as well.
[/QUOTE]
My guess is less than that. In all fairness if your 1500 has a 5.3 or TBI 350 it’s going to be over worked while pulling a big trailer and may not be a valid comparison compared to a purpose built engine for towing.
 

Wheeler

OBS Enthusiast
Joined
Apr 17, 2019
Messages
89
Reaction score
95
Location
Canada
I was averaging between 7-10mpg depending on imhow heavy my foot is rite now.. so I was thinking more power, easier to pull/fuel mileage… but I could be wrong.. I’ve been thinking about a 6.0L swap as well… BUT I’ve already got this set up.. is what has me wanting to utilize it…
 

someotherguy

violent
Supporting Member
Joined
Sep 28, 2013
Messages
19,544
Reaction score
48,067
Location
Houston TX
Look into Torqstorm if nobody has mentioned them yet. Yes, they are "sort of" the old Powerdyne superchargers but not really. Powerdyne had problems with internal belt breakage and flimsy mounting brackets; Torqstorm took over and redesigned everything. They're a pretty inexpensive (relatively speaking) choice for SC's and centrifugal may be a better choice in a traction-limited setup like a truck.

Their kits are not intercooled but many have added aftermarket intercoolers to the mix and they can probably help you with sourcing those parts as they are pretty active on social media, seem pretty tech-savvy and involved with their customer base. You can look 'em up on fb if you use it or just go to their website. They're about 3K for a SBC kit.

Richard
 

L31MaxExpress

Truly Awesome
Joined
Apr 21, 2018
Messages
10,966
Reaction score
18,965
Location
DFW, TX
I was averaging between 7-10mpg depending on imhow heavy my foot is rite now.. so I was thinking more power, easier to pull/fuel mileage… but I could be wrong.. I’ve been thinking about a 6.0L swap as well… BUT I’ve already got this set up.. is what has me wanting to utilize it…
6.0L will be a step backwards. A 350 makes more torque, 1,000 rpm sooner than a 6.0L.
 

letitsnow

I'm Awesome
Joined
May 5, 2018
Messages
1,697
Reaction score
2,524
Location
MN
6.0L will be a step backwards. A 350 makes more torque, 1,000 rpm sooner than a 6.0L.

Nobody wants to hear that - they just want to feel the snappy feel that the 6.0 gives them. Never mind that after that initial throttle response, there isn't much there...
 

L31MaxExpress

Truly Awesome
Joined
Apr 21, 2018
Messages
10,966
Reaction score
18,965
Location
DFW, TX
Nobody wants to hear that - they just want to feel the snappy feel that the 6.0 gives them. Never mind that after that initial throttle response, there isn't much there...
All rev and no real go. There is a reason I put good heads on a 383 with a decent roller cam for my Express van I tow with.
 

Supercharged111

Truly Awesome
Air Force SpaceX Member
Joined
Aug 20, 2015
Messages
17,036
Reaction score
27,010
Location
Da U.P.
Nobody wants to hear that - they just want to feel the snappy feel that the 6.0 gives them. Never mind that after that initial throttle response, there isn't much there...

If you find yourself in a scenario where you NEED to wind it out, I can see it being better. Personally I'd like to stick a 6.0 in my truck, but that's because I have a 2.9L Kenne Bell blower that would sling enough boost at it to fix the anemic torque while being able to enjoy its legs.
 

Curt

Sometimes when I close my eyes, I can't see.
Joined
Feb 25, 2016
Messages
1,170
Reaction score
1,108
Location
Northern California
@L31MaxExpress I have researched your comment in my other thread for a while now…
I have found a new Edelbrock E-Force Supercharger! However it’s $3800 after tax! Plus install & the MSD Boost Retard Box… so this will run me about 7k for everything. Good ole Canada for ya!

So my quest for MORE POWER for towing has lead me down this rabbit hole. I can’t find anyone with this exact SC & limited videos on YouTube. However all I read is awesomeness about a positive displacement SC for towing. So before I pull the pin drop 7k I wanted all comments/advise/ or anyone that HAS one to chime in..

Now please guys keep in mind, EVERYTHING is A LOT more $$ than the states…

For those who don’t know my set up is..
383 Stroker. 9-5-1. Fast Burn Heads. ZZ4 cam. RPM Performer intake & Edelbrock 750 carb. 1 5/8 long tubes. Electric Fan. FAST tranny controller, plus more… oh rite 4.56 gears. 295/75/17s.

I tow 7k or more. It put down 250rwhp & 330rwtq at 3k. All I do is really tow with the truck.
I know it's not apples to apples but positive displacement SC for towing is awesome. My family has an H2 with a Magnacharger S/C on it pushing 5 lbs of boost. Pulls our 21' ski boat loaded down (probably around 5500-6000 lbs) up 8-12% grades for long periods of time like it's nothing. Yes, I know its a 6.0 but point being it's lifted on 38x15.50s and it can haul it's heavy a** along with a boat behind it and the thing acts like the boat isn't even there.

Currently reading into SC's for the burb as I'm in the hunt for more power as well. After I regear, and if I'm still not happy with the power, I'm definitely going this route. Thanks for the find on this SC. If you do end up installing this one, definitely keep us informed!
 

letitsnow

I'm Awesome
Joined
May 5, 2018
Messages
1,697
Reaction score
2,524
Location
MN
If you find yourself in a scenario where you NEED to wind it out, I can see it being better. Personally I'd like to stick a 6.0 in my truck, but that's because I have a 2.9L Kenne Bell blower that would sling enough boost at it to fix the anemic torque while being able to enjoy its legs.
That sounds fun!
 

letitsnow

I'm Awesome
Joined
May 5, 2018
Messages
1,697
Reaction score
2,524
Location
MN
If you find yourself in a scenario where you NEED to wind it out, I can see it being better. Personally I'd like to stick a 6.0 in my truck, but that's because I have a 2.9L Kenne Bell blower that would sling enough boost at it to fix the anemic torque while being able to enjoy its legs.

I am not at all against the 6.0. It is an adequate replacement for the 5.7. It is also newer and has more potential than the old motor.

I just get sick of people thinking that "dropping in an LS" is the cure for not being able/willing to tune a 5.7 or 7.4. As you for sure know - putting together the right package, and making it all work together is important. Many are too lazy to do the work.
 

Latest posts

Forum statistics

Threads
78,111
Messages
1,645,206
Members
81,289
Latest member
Kikkomania
Top