Sweet. I installed mine last week. So far so good. The door closes so well.
Had two bent rollers:
You must be registered for see images attach
Here is what I installed:
You must be registered for see images attach
Question: I also replaced my drivers side exterior door handle. After doing the swap my door still closes but now it is not tight to the striker. You can push on the door like an 1/8" or so. Also when driving now you can hear the door rattle slightly when going slowly over the road. As part of the handle replacement I loosened the latch in the door. Can that change the closing of the door? I tried adjusting that latch afterwards but it seems like the screw holes are basically 1 position only.