CREW CAB LONG BED K3500 NV4500

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

94K3500PROJECT

I'm Awesome
Joined
Aug 29, 2020
Messages
216
Reaction score
246
Location
NE IN
My plan is old school. I plan to use a Fox body Mudstain harness. Mass air and sequential injection.
Trust me I’m fine with old school but I have to keep this as simple as I can…
I think the simplest system might be the dynamic efi setup that should be essentially plug-n-play but I suspect the tuning may be more difficult

I suspect the 0411 will make it easier to run boost in the future which I plan to do
 

94K3500PROJECT

I'm Awesome
Joined
Aug 29, 2020
Messages
216
Reaction score
246
Location
NE IN
Alright so I can try and search and read until the clowns come home but I think I already know a couple things about the tuning aspect of this whole mess.
1: I need it to be as close as possible to plug-n-play
2: The learning curve on ANY tuning is going to be steep
3: Budget matters
4: I’d like to learn the basics of tuning for future LS projects. Anything that can carry over to this is just a bonus.

And so with that said I’m sticking with the stock ECM with DynamicEFI Flash2 mod and WUD data logging. I’ll get it installed and running well and then swap to the TPI intake. Next will be Chinese aluminum heads. Tune some more and then a cam swap. Tune more, run for a year and slap a remote turbo on with a SBE with ring gap.
The next year a forged 383 short block
 

94K3500PROJECT

I'm Awesome
Joined
Aug 29, 2020
Messages
216
Reaction score
246
Location
NE IN
Yeah so this project got sidelined a bit because of life but I’m ready to get back at it…….
And with that gonna have a few questions here and there
 
Last edited:

HotWheelsBurban

Gotta have 4 doors..... Rawhide, TOTY 2023!
Joined
Sep 18, 2019
Messages
9,845
Reaction score
18,020
Location
Houston, Texas
Everybody gettin' more-doors!
I just joined the crew cab club myself..... people need room to spread out!
My new slogan is gonna be: " It ain't big... it's Texas sized".
 

94K3500PROJECT

I'm Awesome
Joined
Aug 29, 2020
Messages
216
Reaction score
246
Location
NE IN
Everybody gettin' more-doors!
I just joined the crew cab club myself..... people need room to spread out!
My new slogan is gonna be: " It ain't big... it's Texas sized".

I was toying with the idea of going a different route to save money but a crew cab OBS has been my dream truck for years so I’m gonna stay on track to do things I really want to do to it
 

HotWheelsBurban

Gotta have 4 doors..... Rawhide, TOTY 2023!
Joined
Sep 18, 2019
Messages
9,845
Reaction score
18,020
Location
Houston, Texas
I was toying with the idea of going a different route to save money but a crew cab OBS has been my dream truck for years so I’m gonna stay on track to do things I really want to do to it
Yep that's my intentions too, for both Burb and crew cab. Rawhide is a little more truck than I need most of the time, but when you need a big'un, you got one.
 

94K3500PROJECT

I'm Awesome
Joined
Aug 29, 2020
Messages
216
Reaction score
246
Location
NE IN
Just waiting on powder coat to be re-done on some stuff
Think I found dual shock hoops that I’ll be picking up Friday, and also a Kodiak gauge cluster
 
Top