Collector gaskets

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Tim W

I'm Awesome
Joined
Oct 29, 2019
Messages
491
Reaction score
625
Location
Tomball Tx
I'm having my headers coated by Jet Hot coatings.

What size collector gaskets do I need? My headers bolted up to my stock Y pipe. I checked Gibson's website but its doesn’t say what size the collector is. Just that it will bolt to stock y pipe
 

Frank Enstein

Best. Day. EVER!
Joined
Jul 15, 2018
Messages
2,005
Reaction score
3,431
Location
Canton, Ohio
If you have a part number for the headers I can look. Many headers don't use a gasket but use a ball and socket connection.
 

Schurkey

Supporting Member
Supporting Member
Joined
Jan 14, 2018
Messages
10,963
Reaction score
13,743
Location
The Seasonally Frozen Wastelands
What size collector gaskets do I need? My headers bolted up to my stock Y pipe. I checked Gibson's website but its doesn’t say what size the collector is. Just that it will bolt to stock y pipe
Define "collector gasket".

If it bolts to the stock Y-pipe, I'd expect more "donut" than "gasket".

When I needed donuts for my Edelbrock headers, I crossed the Edelbrock donut part number to Fel-Pro.

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


I suspect--but do not guarantee--that the 9998 works for your application, too.
 
Top