Classic Industries has these in stock now, just scored me a set.
Cab Mounts
- Thread starter Scooterwrench
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I do wish that my cab still had some metal where the Right Rear cab mount is supposed to bolt to.
jjester6000
I'm Awesome
2x4
I'm considering welding in a patch-panel...but until then, maybe a 2X4. Or 1/2" plywood sheet.
I can't carry a passenger. Any weight in the right side of the cab, and the cab droops down so that the floor reinforcement clangs on the front U-Joint for the rear driveshaft--just behind the transfer case.
Even with just me in the cab, the cab interferes with the U-joint on bumps.
God bless the Seasonally-Salted Frozen Wastelands.
The left-side cab mounts, and the forward mounts on the right side don't seem to be rusted...but I bet the rubber cushions are toast.
I can't carry a passenger. Any weight in the right side of the cab, and the cab droops down so that the floor reinforcement clangs on the front U-Joint for the rear driveshaft--just behind the transfer case.
Even with just me in the cab, the cab interferes with the U-joint on bumps.
You must be registered for see images attach
You must be registered for see images attach
God bless the Seasonally-Salted Frozen Wastelands.
The left-side cab mounts, and the forward mounts on the right side don't seem to be rusted...but I bet the rubber cushions are toast.
Last edited:
That's what coastline trucks look like down here.
Hopefully that’s just a photo that doesn’t actually represent the mounts as they are a distinctively 2 different parts and sizes.
If they ain't right, I'll send 'em back on their dime.
They probably are right, was just saying so for when they arrive, you’ll know immediately.
I have seen several kits online, but they all come with crap bolts - at least for the northeast. The flange is way too thin and the metal appears to be substandard. When you get a chance I’m curious about the quality of the bolts supplied with the kit. Thanks.
I'll post pics when they come in. If I have to I'll reuse my hardware. Fortunately my truck is rust free.
Similar threads
