Bench to Bucket on a c1500

[HeavyAsAChevy]

So I’ve got a manual extended cab with a single passenger seat and the double driver seat. My passenger seat rails were bend when I got the truck and it wobbles terribly. I would like to switch to bucket seats. I would like to get seats out of a 99-07 model. Would I have to drill new holes to make them fit?

You must be registered for see images attach

 

[618 Syndicate]

If only there were a thread about seat alternatives......

88-98 Bucket seat alternatives

Figured I'd post this here for those who may have not seen it elsewhere. Several others have performed this as well. Some may like them, some don't, but this is an easy swap that can be performed in an afternoon. '88-98 manual seat bases bench and bucket, are comprised of of the same...

www.gmt400.com

 

[Eveready]

Just get a cold one and sit and read the "alternatives" thread tagged above. It is well worth it and you will be amazed at what will fit your truck. There are so many possibilities to be looking out for that you will find yourself re-reading it and taking notes.

 

[HeavyAsAChevy]

Alright. That was helpful. Idk how I missed that, but I did nonetheless. Now my next question is. Would I be able to put a center console in between the seats and still be able to shift?

 

[Bigguy45]

the answer to that is yes. I have a regular cab manual with a bench and converted to buckets and a center console

 

[Eveready]

When you finish reading the Seat alternatives thread, you might want to take a look at this one. It should answer most of your questions about consoles.

The Center Console Thread

Here's some ideas for your custom interior:

www.gmt400.com

 

[618 Syndicate]

You could convert to a Esky/Denali console and fab up a shift boot. That'd be different.