udidwht
I'm Awesome
FYI on front bag install for P-30 chassis RVs
A much easier method than using zip ties to fold down the bags for install into control arms. Get 3-4 large radiator hose clamps, Mity-vac hand pump. After having removed the old bags use the Mity pump to draw down the bag and slide the clamps over the bag spaced out and aid in holding them folded down. Just watch when tightening the clamp so it does not claw into the bag. The bag will easily slide up into the lower control arm. Prior to reaching the top slide the protective disk onto the top of the bag. Once the bag is up in the spring work the lower disk into place thru the hole. Done. Now install the lines and air em up.
Did this on my RV and had the job done in roughly 2 hours complete and without tearing my hands up.
A much easier method than using zip ties to fold down the bags for install into control arms. Get 3-4 large radiator hose clamps, Mity-vac hand pump. After having removed the old bags use the Mity pump to draw down the bag and slide the clamps over the bag spaced out and aid in holding them folded down. Just watch when tightening the clamp so it does not claw into the bag. The bag will easily slide up into the lower control arm. Prior to reaching the top slide the protective disk onto the top of the bag. Once the bag is up in the spring work the lower disk into place thru the hole. Done. Now install the lines and air em up.
Did this on my RV and had the job done in roughly 2 hours complete and without tearing my hands up.
