***** Any 2" / 4" lowers trucks out there???? ******

[Loydw]

mine is 2/4 with 15' wheels works well no problems

You must be registered for see images attach

belteck front springs and rear spring hangers

 

[Carl R]

Beltech lowering kit, with beltech shocks on all 4 corners, manual assist air bags on rear for loads , torque thrust II wheels with Nitto tires. No alignment or ball joint issues to date.

 

[Junior_357]

Those Moog springs are the factory height

Yep...but that's what helps keep the near stock ride quality. The progressive Moogs load up nicely when they compress. Most impressive change is that the truck stays almost flat under heavy braking...no more nose dive.

Sent from my XT1254 using Tapatalk

 

[SteveO99]

You must be registered for see images attach

3.5 inch lowering springs and 1 inch lowering shackles in the rear. In the front i have some mcgaughy's lowering keys

I have the same setup. What did you do about the front bump stops riding on the lower control arms? Did you cut them to provide clearance?

 

[Turbokat]

You must be registered for see images attach

I have the same setup. What did you do about the front bump stops riding on the lower control arms? Did you cut them to provide clearance?

Yes i just ended up cutting them away, did the same in rear just to be on the "safe" side

 

[cruizer66]

You must be registered for see images attach

My 1996 GMC C1500 with a Belltech 2“/4“ drop kit, 15“ Boyd’s with 245/60-15 front and 275/60-15 rear, Rolltop tonneau cover

 

[dAT OBS]

You must be registered for see images attach

My 1996 GMC C1500 with a Belltech 2“/4“ drop kit, 15“ Boyd’s with 245/60-15 front and 275/60-15 rear, Rolltop tonneau cover

That's was back in 1996????

 

[LILJOEPEELZ05]

1994 c1500 W/T

You must be registered for see images attach

2/4( coils, shackles and hangers)


Sent from my iPhone using Tapatalk

 

[dAT OBS]

1994 c1500 W/T

You must be registered for see images attach

2/4( coils, shackles and hangers)


Sent from my iPhone using Tapatalk

Love to lowered long beds
Did you ha to use the shims on leafs springs

 

[Cheap Heap]

What size tires on are that 94'?

Clean looking truck.