Air in ABS causing front brake vibration..........UPDATE BRAKES FIXED

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

N Ga Rider

Newbie
Joined
Mar 8, 2022
Messages
14
Reaction score
15
Location
Blsirsville Ga
Just got tired of working on the truck, took it to a shop today. The scanned and bled the ABS. The problem was that the New front rotors and New rear drums were out of round. Guess it's just something simple sometimes. The shop even complained about china junk parts. The turned them and all is good now. Wonder how long they will last till they warp.
 

Schurkey

Supporting Member
Supporting Member
Joined
Jan 14, 2018
Messages
10,969
Reaction score
13,751
Location
The Seasonally Frozen Wastelands
I've been lucky. I've pulled lots of rotors (and a few drums) out of the box, cleaned 'em, and installed them. No problem with pulsation or vibration.

But Communist China can screw-up ANYTHING; and the Communist Collaborators in this country just hate the idea of paying for Quality Assurance. We the People get stuck with a lot of junk.
 
Joined
Sep 13, 2020
Messages
11
Reaction score
7
Location
Iowa
You wil aways feel the brake pedal Pulsating if the vibration is coming from the brakes. Suspension vibration is normally on solid axles. Ifs steering gets really sloppy but not much vibration. Wheel bearings let you know with a howl or grinding noise. Cv axles on 4x4’a will cause vibration. But usually ones trouble happens after maintenance faulty parts do happen more often than you think. Break in process can and will also cause premature failure if not followed.
 
Top