Adj FPR mounting and the NHRA.

[Erik the Awful]

I finally remembered to get a pic. Ideally, the tubing would go straight into the FPR, but this was version 2.0. Also note the perspective is funny because that u-bend has at least a 6" diameter.

You must be registered for see images attach

 

[GMTMark]

My local NHRA inspector would not allow a FPR on the firewall no matter how it's plumbed. The whole assembly is exposed to a flywheel or flex plate explosion. The fuel line is supposed to be run outside the frame until it is in front of the area where the transmission joins the block. Therefore eliminating any kind of firewall mount.

 

[RichLo]

Approve??

You must be registered for see images attach