98 GMC Crew Cab Dually

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

618 Syndicate

You won't...
Supporting Member
Joined
Sep 17, 2020
Messages
6,599
Reaction score
15,446
Location
Southern Illinois
Everything needs to be tidied up, but the bags are on the bridge, the battery is under the bed, the clip is swapped and it's moving. Still need to attend to the bed and flares.

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach

The PCM is grounded because I shorted it on the battery (don't ask) and this is the only way it'll run. New one will be here tomorrow or Tuesday.
 
Last edited:

618 Syndicate

You won't...
Supporting Member
Joined
Sep 17, 2020
Messages
6,599
Reaction score
15,446
Location
Southern Illinois
The hood hinges won't clear the tubs, so I'll order a prop rod. That's the only real issue that we couldn't find a workaround for.
I relocated the cold air intake a little, and ran a heavier (2 ga) wire from the alternator to the distribution block.

You must be registered for see images attach


You must be registered for see images attach
 

618 Syndicate

You won't...
Supporting Member
Joined
Sep 17, 2020
Messages
6,599
Reaction score
15,446
Location
Southern Illinois
Made some pretty good progress yesterday. Repurposed a top rack off an old camper as floor support for the new bed floor. I'd already cut the floor out of a bed I picked up a couple of years ago anticipating doing this.

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 
Top