97 2500 454 SLT 4 inch lift.

[Schu3507]

Hello folks. Just finished a install on 97 suburban 2500 454.
Used the TC 4 inch lift and wasn’t not simple bolt on instal and does not take 10-12 hrs. Regardless I think looks great and rides nice. Alignment was dead on in the green. Shocked. Exhaust wasn’t terribly hard but wasn’t expected. Looking for some veteran knowledge from the forum going forward. Thank you in advance

 

[Schu3507]

Some more images and how it started.

 

[Courchained]

Looking to install this kit on my 98k2500. Any tricks or suggestions on the front end parts..

 

[Courchained]

You must be registered for see images attach

what were these for?

 

[pgutier1]

You must be registered for see images attach

what were these for?

Rear sway bar endlinks I believe. Damn it, I took a 4" lift kit off a '98 Chevy Silverado K1500 Z71 at a PNP and I didn't see this on the truck. Thanks for the reminder!

 

[termite]

Some more images and how it started.

What size tire are running after install? Previous owner cranked torsion bars and tucked oversize tires on my K2500 suburban and i'm looking to correct the angles and replace all bushings without doing much lift.

 

[Schu3507]

Looking to install this kit on my 98k2500. Any tricks or suggestions on the front end parts..

It’s a labor intense instal. Cutting brackets and such. Just take time and Dow when warm

 

[Schu3507]

What size tire are running after install? Previous owner cranked torsion bars and tucked oversize tires on my K2500 suburban and i'm looking to correct the angles and replace all bushings without doing much lift.

Tires are 310-70-16. I’m having issue wt front axles popping out when in 4wd. Going to try 1/2 more spacers

 

[termite]

Tires are 310-70-16. I’m having issue wt front axles popping out when in 4wd. Going to try 1/2 more spacers

Thanks for the reply. I'm going to part with my current tires and go back closer to a stock size. With 3 helpers in tow, the better half won't support my making it harder to get the kids in.