95 wiring harness interchangeablility?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Adam Strasser

Newbie
Joined
Oct 28, 2020
Messages
28
Reaction score
10
Location
Tennessee
I’ve got a 95 c1500 with the manual. I chopped up the original harness trying to do my own Ls swap harness and just ended up getting terminator x. I found a harness out of a 95 2wd with the auto trans. Will it work in place of the manual harness? Motor and trans are no longer in the equation so mainly need it for body control stuff.
 

_slxck

Newbie
Joined
Sep 2, 2021
Messages
24
Reaction score
8
Location
Pennsylvania
I would think you'll be just fine as long as you use the modules that were originally in the manual truck. Whatever extra wires/connectors you have in the auto harness can be traced and removed altogether or just cut them wherever and tuck the ends inside the loom. All the non-engine/trans related wires and connectors should be the same from one harness to the other for the most part.
 
Top