95 burb 5.7 diagnostic data

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

eran tomer

I'm Awesome
Joined
Nov 25, 2020
Messages
425
Reaction score
264
Location
israel
hello
this is my Soluspro diagnostics, what can we learn from it?

xc_hide_links_from_guests_guests_error_hide_media
 

texas tough

I'm Awesome
Joined
Jan 5, 2020
Messages
190
Reaction score
144
Location
texas
your in open loop at 195 f thats not right. some scanners read the temp from the gauge sensor and not the coolant temp sensor, Im thinking either u have a faulty 02 sensor or coolant temp sensor. I think the coolant temp sensor signals the ecm into closed loop. 02 sensor controls fuel trims once in closed loop. your knock count is also high. knocking happens when its running lean usually. I would test or replace the CTS. until u get it to go into closed loop it wont run good. if coolant temp thinks its cold it will dump extra fuel. to a point. dont run it hard if its running lean. get her legs closed
 
Top