Hey not exactly sure what is wrong with this here but here is my story : So I took my fuel meter cover off on my throttle body just to check my injectors and make sure nothing was blocking my fuel path. Well I messed my gasket up a bit. I was able to piece it together with rtv though. Nothing was leaking after I put it back together. Well recently my left injector cup fills with fuel as soon as I start my truck and it sputters when I come down to idle, usually trying to die. Are the injectors for 94 tbi high or low impedance? I want to make sure they work right before replacing my gasket
94 vortec tbi injector stuck closed?
- Thread starter Tyler55
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Sounds like the o ring at the top of the injector is leaking or the screen on the side is plugged. Any restriction or leak will blow fuel out the top and flood it.
Ya gotta get that silicon out of it for sure.
Get a throttle body rebuild kit. It needs it. They all need it.
Lots of YouTube videos on how to do it. Almost all of them are wrong.
It's actually really easy to do and about 30 bucks tops
Send me a message if you have any questions about it.
It's cake if you take it slow and makes a world of difference
Ya gotta get that silicon out of it for sure.
Get a throttle body rebuild kit. It needs it. They all need it.
Lots of YouTube videos on how to do it. Almost all of them are wrong.
It's actually really easy to do and about 30 bucks tops
Send me a message if you have any questions about it.
It's cake if you take it slow and makes a world of difference
