88-98 K1500 Third Brake Light

[extramile71]

Well when I plug the 067 up it shoots fuses ?? I figured they might have been wired different??

And I went to chevy dealership and their computer wouldn't show the 067 one it showed the 434 one ..I'm stumped

 

[Caman96]

I would almost guarantee the bezel’s all are wired the same. Take bezel w/bulbs installed. Then put 12v to one red and negative to the other red(diagonal), then the same with the yellow as noted in picture below. One test will light the 2 center brake lights and the other, the outside 2 cargo lamp’s. If that works then you have other electrical gremlins. But, you’ve always said it was a fitment issue.

You must be registered for see images attach

 

[extramile71]

I would almost guarantee the bezel’s all are wired the same. Take bezel w/bulbs installed. Then put 12v to one red and negative to the other red(diagonal), then the same with the yellow as noted in picture below. One test will light the 2 center brake lights and the other, the outside 2 cargo lamp’s. If that works then you have other electrical gremlins. But, you’ve always said it was a fitment issue.

You must be registered for see images attach

Thanks man ill try that

 

[extramile71]

I would almost guarantee the bezel’s all are wired the same. Take bezel w/bulbs installed. Then put 12v to one red and negative to the other red(diagonal), then the same with the yellow as noted in picture below. One test will light the 2 center brake lights and the other, the outside 2 cargo lamp’s. If that works then you have other electrical gremlins. But, you’ve always said it was a fitment issue.

You must be registered for see images attach

Let me ask you about cleaning these assemblies...after the water and baking soda you just submerged these I alcohol? For how long? Thanks

 

[Caman96]

Let me ask you about cleaning these assemblies...after the water and baking soda you just submerged these I alcohol? For how long? Thanks

Distilled water and baking soda. I did about 1 hour. Did you connect 12v to test?

 

[extramile71]

Distilled water and baking soda. I did about 1 hour. Did you connect 12v to test?

Lol not yet it's like 20 degrees in the shade for the last few days lol but I will thanks for info man

 

[Caman96]

Lol not yet it's like 20 degrees in the shade for the last few days lol but I will thanks for info man

That’s an inside job all the way.

 

[Caman96]

Interesting the RzLightz eBay ad says this in description. I don’t see how this would work.

You must be registered for see images attach

3rd Brake Light Lens chevy 94-98 Silverado GMC Sierra third ck c1500 c2500 obs | eBay

RED LENS 3RD BRAKE LIGHT WITH CLEAR CARGO FOR YOUR CHEVROLET OR GMC TRUCK. EASILY ADD VALUE TO YOUR TRUCK WITH THIS FRESH LENS. HIGH QUALITY. WILL NOT FIT EXTENDED CAB MODELS UNLESS YOU USE A BASE FROM A SINGLE CAB OR CREW CAB.

www.ebay.com

FWIW Black Friday an additional $11.50 off with rzblack code.

 

[someotherguy]

Interesting the RzLightz eBay ad says this in description. I don’t see how this would work.

You must be registered for see images attach

3rd Brake Light Lens chevy 94-98 Silverado GMC Sierra third ck c1500 c2500 obs | eBay

RED LENS 3RD BRAKE LIGHT WITH CLEAR CARGO FOR YOUR CHEVROLET OR GMC TRUCK. EASILY ADD VALUE TO YOUR TRUCK WITH THIS FRESH LENS. HIGH QUALITY. WILL NOT FIT EXTENDED CAB MODELS UNLESS YOU USE A BASE FROM A SINGLE CAB OR CREW CAB.

www.ebay.com

Right.. they're kind of weaseling around the subject, because yeah; their lens will "fit" if you change the base to one from a reg/crew cab because their lens is reg/crew cab. So their lens will fit that base.. but that base won't fit your extended cab. Not correctly, anyway. What a crummy way to advertise that part, especially when you consider how much it costs.

Richard

 

[Caman96]

Right.. they're kind of weaseling around the subject, because yeah; their lens will "fit" if you change the base to one from a reg/crew cab because their lens is reg/crew cab. So their lens will fit that base.. but that base won't fit your extended cab. Not correctly, anyway. What a crummy way to advertise that part, especially when you consider how much it costs.

Richard

I agree! Maybe it would fit an F150 too.