88-00 GM truck rear disc brake conversion.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

dfarr67

OBS Enthusiast
Joined
Jun 15, 2012
Messages
96
Reaction score
17
Location
Edson, AB
88-00 GM 4x4 truck rear disc brake conversion. Kingtek plates, D52 calipers, Hawk pads, hydraulic lines, 88 light duty discs- ACD. Fits rectangular mounting plate- not square. $200, will ship at cost.

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 

dfarr67

OBS Enthusiast
Joined
Jun 15, 2012
Messages
96
Reaction score
17
Location
Edson, AB
You would have to do your own research- I think at least a disc/disc proportioning valve is needed. In the end I used a 94 Suburban master and hydroboost, worked very well.
 

dfarr67

OBS Enthusiast
Joined
Jun 15, 2012
Messages
96
Reaction score
17
Location
Edson, AB
No, you would purchase Eldorado calipers for that option. I found I was replacing those too often- the D52 calipers last much longer and I installed a driveline brake.
 
Top