64’ IHCC daily commuter tractor

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Orpedcrow

I don’t know what I’m doing
Supporting Member
Joined
Aug 20, 2022
Messages
2,287
Reaction score
5,774
Location
East Texas
Got a few things done in this pile too, made a beefy support for the clutch release arm, the stock one is spot welded to some sheet metal tabs and flexed quite a bit with the heavy duty clutch spring.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach


And then I went to tractor supply…
 

Orpedcrow

I don’t know what I’m doing
Supporting Member
Joined
Aug 20, 2022
Messages
2,287
Reaction score
5,774
Location
East Texas
They had some smoking mark downs in the clearance section…
You must be registered for see images attach
You must be registered for see images attach


$14.99 for the ribbed front tires!
You must be registered for see images attach
You must be registered for see images attach


2 brushed on coats of red oxide primer on the barrels and 2 coats of generic ivory on the outside.

The front wheels are a different story, in the meantime it’s rocking some run flat furniture dolly wheels lol

You must be registered for see images attach
 

Orpedcrow

I don’t know what I’m doing
Supporting Member
Joined
Aug 20, 2022
Messages
2,287
Reaction score
5,774
Location
East Texas
I guess I didn’t show y’all the grille either, it’s a damaged piece out of one of the parts scouts, I just cut it to fit and bolted it in.
You must be registered for see images attach
You must be registered for see images attach
 
Top