350 Tbi setup need help with part combos

[thatclappedsilverado]

So ive got a tbi 350 jasper engine with 78k miles on it.
tore down to a short block, looking for some help putting a proper part list together.
Im thinking a comp cams thumper cam. 479/465 lift

CL12-600-4


vortec heads, port and polished, summit racing stage 1 intake and a holley 650cfm
im new to building engines so im hoping this will be a relatively good build. i want an aggressive cam mostly for sound, but also because the truck is either gonna get a procharger or turbo later on down the line.

Any input is appreciated. ive also got a set of mid length headers for it.

 

[Erik the Awful]

If your block has the provisions for a roller cam, there is absolutely no reason to run flat-tappet. If you're putting Vortec heads on it, make a trip to the treasure yard and get some roller lifters, dogbones, and spider. With the old-school umbrella seals and beehive valvesprings you can also run more lift.

Here's a list of decent rebuild parts, sticking with decent quality brands.

Piston Ring Set Sealed Power E251X
Main Bearing Set Mahle MS909P
Connecting Rod Bearing Set Mahle CB663P
Engine Gasket Set Sealed Power 2601269
Freeze Plug Set Melling MPE100BR
Timing Chain Set Melling 163
Camshaft Lunati 20080720 (211/219 @ .050, .510/.515 lift)
Valve Spring Set Chevrolet Performance 12499224
Valve Spring Retainer Set Comp Cams 787-16
Valve Keepers Sealed Power VK115
Valve Stem Seals Fel Pro SS72861
Dual Plane Intake Manifold Summit SUM-226018
Spark Plug Wire Set Summit G1450
Spark Plugs AC Delco R44LTS6
Water Pump AC Delco 252719
Oil Filter x2 Wix 51061