5SPD350
Newbie
I'm really interested in a set of weld prostar replicas. In specific 15x10 with a 4.5 BS. Using 275/60/15 tires.
Will these fit on a 3/4 drop? (Coil in front, shackle/hanger rear)
Im currently running a 275/60/17 on a 17x8 wheel with 4.5 bs. I have no problems other than on my drivers side front. On deep bumps at anything but slow speed the fender will zip my sidewall ever so slightly. Never on passenger side. I think my fender might be slightly pushed in or camber off.
I found a wheel fitment simulator and it looks like minimal extra wheel/tire sticking out towards the fender and no extra towards the suspension. With a 1 inch gain in vertical gap.
What do you guys think? Included is my truck now, the wheel/tire I want, and the image from that simulator.
Will these fit on a 3/4 drop? (Coil in front, shackle/hanger rear)
Im currently running a 275/60/17 on a 17x8 wheel with 4.5 bs. I have no problems other than on my drivers side front. On deep bumps at anything but slow speed the fender will zip my sidewall ever so slightly. Never on passenger side. I think my fender might be slightly pushed in or camber off.
I found a wheel fitment simulator and it looks like minimal extra wheel/tire sticking out towards the fender and no extra towards the suspension. With a 1 inch gain in vertical gap.
What do you guys think? Included is my truck now, the wheel/tire I want, and the image from that simulator.
You must be registered for see images attach
]
You must be registered for see images attach
You must be registered for see images attach
Last edited: