3/4 drop w/ 15x10 4.5 bs 275/60/15 will they fit?

5SPD350

Newbie
Joined
Nov 8, 2013
Messages
22
Reaction score
0
Location
Elkland, PA
I'm really interested in a set of weld prostar replicas. In specific 15x10 with a 4.5 BS. Using 275/60/15 tires.

Will these fit on a 3/4 drop? (Coil in front, shackle/hanger rear)

Im currently running a 275/60/17 on a 17x8 wheel with 4.5 bs. I have no problems other than on my drivers side front. On deep bumps at anything but slow speed the fender will zip my sidewall ever so slightly. Never on passenger side. I think my fender might be slightly pushed in or camber off.

I found a wheel fitment simulator and it looks like minimal extra wheel/tire sticking out towards the fender and no extra towards the suspension. With a 1 inch gain in vertical gap.

What do you guys think? Included is my truck now, the wheel/tire I want, and the image from that simulator.
You must be registered for see images attach
]
You must be registered for see images attach

You must be registered for see images attach
 
Last edited:

Gmt4000

Newbie
Joined
Dec 3, 2020
Messages
9
Reaction score
7
Location
Donna Tx
its been a while since this post was made but I've been looking up this set up as well
I too am a fan of wheel poke
This is mine right now 275 60r17 17x10 with 4in back space
View media item 32567This is what the other set of wheels I'm going to put on it 15x8 15x10 3.75 Back space
View media item 32569And this is the tire I'm planning to run on the rear View media item 32566 15x10 on 285 70r15
 

b454rat

I'm Awesome
Joined
Jul 25, 2019
Messages
1,034
Reaction score
689
Location
Windsor NY
That 285/70 is kinda n oddball tire anymore. BFG used to make it, now Coker has the patent or whatever on it, so price is sky high for what it is. I have a Tahoe with about a 2/4 drop, running C5 vette wheels, with I think a 5.5" b/s rear, 295/45/18 tire. Since the wheels are the smaller bolt pattern I had to get adaptors. If I had a 2" over the 2 1/4", it would tuck just a lil more. But as of now it doesn't rub at all. Rears are 9.5" wide with 7.5" b/s, so with the right spacer it would tuck more, there is over an inch I think on the inside if wanted to go lower. The rear is lowered lil more in this pic, but least give you an idea....

You must be registered for see images attach
 

Gmt4000

Newbie
Joined
Dec 3, 2020
Messages
9
Reaction score
7
Location
Donna Tx
Well the only other tire are the galaxy r1 vitours there the ones on black b250 van only 200 and the cockers are about 290 to 300 each so im running them only for the rear
And i really like vette wheels to but o have these 17x10s on mine View media item 32564
 

Gmt4000

Newbie
Joined
Dec 3, 2020
Messages
9
Reaction score
7
Location
Donna Tx
This the same as mine but on a 4/6 with i think it was 285 40r17 they are really rare carusi line wheels i think they are italin made not sure but i can only find them in mexico got mine a while back

You must be registered for see images attach
 

89_OBS_SPORT

Newbie
Joined
May 3, 2021
Messages
1
Reaction score
0
Location
Houston
Well the only other tire are the galaxy r1 vitours there the ones on black b250 van only 200 and the cockers are about 290 to 300 each so im running them only for the rear
And i really like vette wheels to but o have these 17x10s on mine View media item 32564

you won’t sell this 17s? Or trade for eagle 15x10 plus some cash
 
Top