22s on 33s

Discussion in 'Stock Suspension + Bolt On Kits' started by scott_williams2, Sep 14, 2019.

  1. scott_williams2

    scott_williams2 OBS Enthusiast

    Messages:
    78
    Likes Received:
    2
    Joined:
    Jul 13, 2017
    Location:
    Gulfport, MS
    so I have a 95 ext cab z71. I’m wanting to run 22 inch chrome snoflakes on 33 MTs with 2 inch spacers. My question is will they clear with no rubbing? And will I have to cut studs?
     
  2. Dylan Pope

    Dylan Pope Newbie

    Messages:
    30
    Likes Received:
    0
    Joined:
    Feb 5, 2019
    Location:
    Carrollton Ga
    2476351F-5A6D-4DF5-BC8B-2BC3F2545DF1.jpeg I’m running 22s on 33s with no problem I have 3 inch keys with the bolt set on the stock position.As far as spacers goes just depends on how thick your spacers are.
     
  3. scott_williams2

    scott_williams2 OBS Enthusiast

    Messages:
    78
    Likes Received:
    2
    Joined:
    Jul 13, 2017
    Location:
    Gulfport, MS
    I plan on 1.75 in the front and 2s in the back and putting aftermarket keys on it. Think they would clear no rub???
     
  4. Dylan Pope

    Dylan Pope Newbie

    Messages:
    30
    Likes Received:
    0
    Joined:
    Feb 5, 2019
    Location:
    Carrollton Ga
    Like I said you shouldn’t have any problems I ran 33s on my truck with the stock keys not even cranked and it didn’t rub at all,Maybe if I really flexed it out but other than that,also if you plan on getting aftermarket keys go ahead and get extended upper control arms and a diff drop bracket these will keep your truck from riding like a mule.
     
  5. scott_williams2

    scott_williams2 OBS Enthusiast

    Messages:
    78
    Likes Received:
    2
    Joined:
    Jul 13, 2017
    Location:
    Gulfport, MS
    Did u run spacers? And if so what size
     
  6. Dylan Pope

    Dylan Pope Newbie

    Messages:
    30
    Likes Received:
    0
    Joined:
    Feb 5, 2019
    Location:
    Carrollton Ga
    nah man you wont need spacers,they will clear just fine.I also replied to your other thread,thats the same truck just before i did anything to it.
     
  7. scott_williams2

    scott_williams2 OBS Enthusiast

    Messages:
    78
    Likes Received:
    2
    Joined:
    Jul 13, 2017
    Location:
    Gulfport, MS
    Gotcha I just wanted spacers for the offset do u think it would clear with spacers???
     
  8. Dylan Pope

    Dylan Pope Newbie

    Messages:
    30
    Likes Received:
    0
    Joined:
    Feb 5, 2019
    Location:
    Carrollton Ga
    I don’t see any reason why it wouldn’t,do you still have your black valance on the bumper?
     
  9. scott_williams2

    scott_williams2 OBS Enthusiast

    Messages:
    78
    Likes Received:
    2
    Joined:
    Jul 13, 2017
    Location:
    Gulfport, MS
     
  10. Dylan Pope

    Dylan Pope Newbie

    Messages:
    30
    Likes Received:
    0
    Joined:
    Feb 5, 2019
    Location:
    Carrollton Ga
    It may rub that with spacers I’m not sure as I don’t have a valance on my truck,once again I think you will be fine either way I have a buddy with a 2wd single cab like our trucks and he ran 33s with no lift for the longest time and he only cut the front bumper
     

Share This Page