1997 5.7 mis fire real bad

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

[email protected]

I'm Awesome
Joined
May 12, 2014
Messages
344
Reaction score
121
I moved my coil and heat sink with bracket onto the fire wall to make room for taller valve covers. After all done I started the engine and engine misfired baddly I could rev it up bur mis fire still there.
Should I run a ground strap from the coil bracket to the engine?
Thanks in Advance
 

alpinecrick

I'm Awesome
Joined
Jun 12, 2015
Messages
1,694
Reaction score
1,839
Location
Western Slope of Colorado
I moved my coil and heat sink with bracket onto the fire wall to make room for taller valve covers. After all done I started the engine and engine misfired baddly I could rev it up bur mis fire still there.
Should I run a ground strap from the coil bracket to the engine?
Thanks in Advance
Wait until it's dark outside in a place with little ambient light. Let the truck warm up well and open the hood, check for arcing at the coil and plug wires. Is the coil wire touching or close to touching ANY metal?
In the stock location, the coil wire likes to lay close or against the stock bracket, and it's almost always the first place to start arcing as the wires age.
 

[email protected]

I'm Awesome
Joined
May 12, 2014
Messages
344
Reaction score
121
Wait until it's dark outside in a place with little ambient light. Let the truck warm up well and open the hood, check for arcing at the coil and plug wires. Is the coil wire touching or close to touching ANY metal?
In the stock location, the coil wire likes to lay close or against the stock bracket, and it's almost always the first place to start arcing as the wires age.
I will try this weekend ,They are new wires also But great idea
 

[email protected]

I'm Awesome
Joined
May 12, 2014
Messages
344
Reaction score
121
Finally got around to checking ignition and it was a melted rotor. Maybe the msd causing this it is my third rotor.
This time I changed rotor and cap. All three times happened within 1500 miles ???????????
Thanks for the help
 

Schurkey

For a pacifist, I sure am a radical mother...
Supporting Member
Joined
Jan 14, 2018
Messages
17,650
Reaction score
27,334
Location
The Seasonally Frozen Wastelands
I've run MSD spark boxes (5, 5C, 6T, 6AL) for thousands and thousands of miles. Never melted a rotor.

Verify the plug gaps aren't excessive, the plug and coil wires don't have excess resistance, and the rotor button in the middle of the cap isn't destroyed.
 

Latest posts

Members online

Forum statistics

Threads
78,111
Messages
1,645,206
Members
81,289
Latest member
Kikkomania
Top