Discussion in 'Street Build Threads' started by RolandoLowko, Oct 21, 2019.
Got the temp gauge working next is the Oil pressure ill do an Update then
Nice job. I also used the 3 wire sensor. It seems to read just a bit on the cold side, but it's close enough for me! I also learned my lesson about using anything other than Delco for it - the Standard Motor Products sensor lasted a few months.
Got an AirFilter temp for now ordered the oil pressure adapter today getting here Saturday
Appreciate it man this was my first swap ever !
Here are the parts what i used to plumb my fuel system for anybody that wants to do this kept the Fuel filter/Regulator pretty much stock location. THIS IS FOR RETURNLESS FUEL SYSTEMS ONLY!!!
(4)Russell 610025 (Hose Ends)
Can use 5Ft of AN hose its plenty enough
This is how i made my Tac Work on my 94 GMC Sierra would work on 92-95.
I used the Brown Wire off the DRAC Box
Correction Meant ******SPEEDOMETER
This is how i made the Tach work White wire Pin A this connector is under the Glove box.
Separate names with a comma.