1992 instrument cluster needed

[DerekTheGreat]

Do you have access to a treasure yard (junk yard) near you? You can usually nab them for ~20-50 bucks at one of those. Also, '92 to '93 would look at home in your truck. 1994 was the first year for the oil pressure readings to go from "0 - 40 - 80" vs the older "0 - 30 - 60".

 

[evilunclegrimace]

Do you have access to a treasure yard (junk yard) near you? You can usually nab them for ~20-50 bucks at one of those. Also, '92 to '93 would look at home in your truck. 1994 was the first year for the oil pressure readings to go from "0 - 40 - 80" vs the older "0 - 30 - 60".

The local yards near me are pretty well picked over. I am going to have another look next week to see if any new trucks show up.

 

[Dubs]

This is a 5 speed cluster.

 

[DerekTheGreat]

They're essentially the same as an Auto cluster, only the auto gets an additional light where the gear indicator is. The manual has the ultra rare block out plate, the one I need still

 

[97C1500TJ]

I’ve got a moonie cluster. I don’t know if the circuit boards are the same though.

 

[Frank Enstein]

I used a sticker and black magic marker to "convert" my cluster to a manual transmission cluster.

The plan is to put gear position LED's for the manual transmission there.

 

[Frank Enstein]

I have repaired pc boards by soldering a jumper across a break and by "tinning" the contact areas for the lights.

 

[EmeraldCityGuy]

I recently had my gauge cluster reconditioned at ISS Automotive. This was a month ago. When I was in there, they told me they had whole units one could buy. But I'd just send them yours and let them rebuild it.
They try to turnaround units in 2-5 days. Mine works great now.

Instrument Cluster Repair

Instrument cluster repair for GMC Buick, Cadillac, Hummer, Chevy, Pontiac and Oldsmobile. 24-hr Turnaround. Skip the Dealer & Save. 2000-2020 Autos. Shop Now!

issautomotive.com

800-548-1195

 

[someotherguy]

I have repaired pc boards by soldering a jumper across a break and by "tinning" the contact areas for the lights.

This ^^^ easy enough to find the break with a multimeter set on "continuity" beep.. then solder in a small jumper wire.

Richard

 

[evilunclegrimace]

Thanks for all the replies. Dubs fixed me up and the 92 now has full instrument illumination.