It's been a while since I posted an update, so here it is... the front end rebuild is complete! This took much longer than expected, mainly due to me being a perfectionist and wanting to clean and paint the frame while everything was apart. A note to anyone else trying this, the lower control arm bushings are VERY hard to replace. I ended up buying a second set of control arms after a local shop bent my original control arms trying to press in new bushings. The tangs that support the bushings are very thin and you need to build a jig to support them when pushing in the new bushings.
As far as suspension parts, I mostly went with the Mevotech TTX line. I think it came together really nice. Finished it off with a set of Bilstein shocks and Cunningham Machine tie rod sleeves.
YouTube video:
xc_hide_links_from_guests_guests_error_hide_media