1990 GMC K1500 restoration

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

idlook2

OBS Enthusiast
Joined
Dec 2, 2020
Messages
86
Reaction score
224
Location
Iowa City, IA
Flipped the distributor and it fired up! I’ve got a timing light on order to finalize the timing but it was good to hear it run again.

Went ahead and replaced the ignition control module while I had the distributor out again.

xc_hide_links_from_guests_guests_error_hide_media
 

idlook2

OBS Enthusiast
Joined
Dec 2, 2020
Messages
86
Reaction score
224
Location
Iowa City, IA
While I had the steering shaft out to replace the rag joint, I noticed the lower steering column bearing had quite a bit of movement. This does not seem to be a super common repair but I imagine it will help a little bit with the loose steering that so many people talk about in these trucks. Enjoy the video!

YouTube video
xc_hide_links_from_guests_guests_error_hide_media
 
Top