1990 Clutch?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Brady

Newbie
Joined
Feb 3, 2015
Messages
43
Reaction score
3
Location
Chillicothe, OH
1990/K1500/RCLB/350/5spd/123k

Clutch pedal travels to floor unrestricted. Reservoir is full. Can shut it off and it seems I can shift it again. But pedal is super soft and at slow speeds forget about it. No slippage under power through the gears. What causes this? What do I need to look for? To best of my knowledge, slave cylinder was replaced last fall. Thanks for your time. -Brady
 

Brady

Newbie
Joined
Feb 3, 2015
Messages
43
Reaction score
3
Location
Chillicothe, OH
Bled the clutch system and pedal is much better. Before the clutch would start to engage even with pedal to the floor. Now I can hold it all day long. Normal driving it is fine. If I pump it 7/8 times it will fade. I suspect the plunger in the clutch master cylinder is slow in returning. I'll drive it like is for now.
 
Top