1500 Hydroboost Conversion Part Numbers

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Mike

I'm Awesome
Joined
Dec 2, 2009
Messages
1,585
Reaction score
455
Location
Mass.
Hey I keep seeing this question asked so here's some help

These part numbers are from AutoZone:
3/8" Hose - 4 Feet
3/8" Brass T Fitting
Power Steering Fluid
Hydroboost Master Cylinder - NM3011 - $70
Brake Booster - 52-7358 - $200
Line 1 - 92007 - $31
Line 2 - 92004 - $23

From LMC Truck:
Brake Pedal w Pad - 35-3632 - $33

From Summit Racing:
Brake proportioning valve of your choice ~$75

Finish it off with 2500 front calipers and 1500 front pads with stainless lines front and rear.
 

CrustyJunker

Is STILL Here?
Joined
May 20, 2012
Messages
553
Reaction score
382
Location
Indiana, USA
Thanks a ton for that information. By proportioning valve, do you mean that the ABS must be bypassed?
 

Mike

I'm Awesome
Joined
Dec 2, 2009
Messages
1,585
Reaction score
455
Location
Mass.
I would remove the ABS, you don't have to. I have found better results without it.
 

CrustyJunker

Is STILL Here?
Joined
May 20, 2012
Messages
553
Reaction score
382
Location
Indiana, USA
For a little better biasing, and the ABS modules are typically finicky. They don't always bleed all the dirty fluid out and once air gets trapped in them getting it out can be a big issue.
 

GordonCustoms

I'm Awesome
Joined
Jan 22, 2012
Messages
145
Reaction score
130
Location
Princeton, IL.
Whats the difference between the 92006 and the 92007 power steering hoses that people use on this swap, I have a 98 k1500 and I'm using the 52-7358 hydro unit
 
Top