13" NBS rear disc on 14 bolt SF

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

JWOK

Supporting Member
Supporting Member
Joined
Aug 23, 2020
Messages
134
Reaction score
171
Location
Oklahoma
Hey guys I'm doing the same swap. I bought the same 60mm spacers, although the spacers are not sitting flush on the flange , should I expect this or do I need to make the circle diameter bigger ? Help! Sent from my SM-N960U using Tapatalk

Not sure if other people have been running into this problem, but do not run those spacers until you can get them to bolt up flush to the axle flange. You need to enlarge the center of the spacer to allow it to mate up with the flange or it could work loose.
 

Pro439

I'm Awesome
Joined
Aug 1, 2022
Messages
154
Reaction score
141
Location
Rome,NY
You must be registered for see images attach

I put the whole thing on my ff that had drums. Made a template and cut it out cut the old mount off and welded the new on after I assembled it bleed the brakes and held them on before I welded them to get the flange where it needed to be. What a difference in stopping power
 

Attachments

  • IMG_1462.jpeg
    IMG_1462.jpeg
    21.5 KB · Views: 6

caw_86

Supporting Member
Supporting Member
Joined
May 31, 2022
Messages
563
Reaction score
805
Location
DFW, Texas
My factory “gmt800 Kit” for a 14 bolt SF
Got the flange brackets and 1 dust shield from a junkyard, everything else new, came out to $900
IMG_0277.jpeg



rear pads NS834buybrakes116
rear calipers S4764amazon169
rear disk rotors AR8645XPRrockauto184
parking brake kit 1792236rockauto63
parking brake cable 18p2542rockauto21
parking brake cable 18p2612rockauto28
Caliper bolt 14006rockauto12
brake spacer 60mmcunninghammachine123
Rear brake line 950.66500Buybrakes54
745-40001/2-20rear brake889.98
Dust shield Summit $25
 
Top