steering shaft

  1. K

    Play in New Steering Gear Box After Cunningham Machine Steering Shaft

    I just installed a CM lower steering shaft. It's amazing. Build quality is top notch. While I was in there, I replaced my leaking steering gear with a Blue Top unit. After getting it all back together, I noticed a 1/4 of "dead play" in my steering wheel. Feels like a gap between the gears in...
    • kephas
    • Thread
    • blue top bluetop cunningham machine cunninghammachine lower steering shaft steering box steering gear steering shaft
    • Replies: 17
    • Forum: General GMT400 Discussions
  2. Misterman

    Cunningham Machine lower install

    Well about a month ago I finally got an extra set of hands to wiggle the steering wheel while I looked with a flashlight. I could see excessive play in the less than a year old lares 205 rag joint. So I ordered the CM lower steering shaft. First impressions: YES. Built well. Thought out...
  3. JalopiedAllOver

    Where's the play in the steering coming from?

    See video: I have a slight play in the steering. Enough to annoy me but otherwise functional. For most of this video I'm jiggling the steering wheel back and forth just enough so that the wheels aren't even turning. So the steering shaft itself isn't where the play is coming from. Could it be...
  4. ObsBrian

    Steering column/intermediate shaft

    I have a 95’ 2500 and I took my steering shaft off to replace the rag joint and all went well and I put the coupler part on first then I tighten the bolt and extended it to the steering column and the holes will not line up at the column and at the end of the shaft can anybody help me?
  5. Cunningham Machine

    Rag Joint Delete Steering Shafts

    With most of these trucks getting some miles on them the wandering steering becomes a real issue. We are fully aware of all the options on the market that can help this, but I am here to show you ours. It is a complete bolt in ZERO modifications needed install. It takes longer to find the right...
  6. Cunningham Machine

    Cunningham Machine

    Good Evening fellow truck buddies, I am Jeremy Rogers from Cunningham Machine. I am sure a lot of you have heard of us or use our product. I just want to expand out to more members where they can feel free to ask us any questions. For those of you that don't know who we are. We are a small...
  7. J

    Gmt 400 k1500 steering drama could use help on

    I inherited my uncles gmt 400 it has a 8 inch lift, before I got the truck it was vandalized they cut out the battery and power bank in the eninge compartment and under the dash, wore the front caliper to a stump including the rotor destroyed the back brake cylinder after replacing and fixing...
  8. 1994chevycheyenne

    Intermediate Steering Shaft and Rag Joint Replacement: 1994 Chevy C1500 (Borgeson 000936)

    Today we are going to replace the intermediate shaft on my 1994 Chevy C1500 and see it we can improve the sloppy steering that these trucks suffer from. The intermediate shaft is also known as the steering shaft. Maybe we will just call it a steering intermediate shaft? Either way, let’s just...
    • 1994chevycheyenne
    • Thread
    • 1994 1994 c1500 1994 chevy cheyenne c1500 chevy c1500 intermediate shaft steering steering shaft
    • Replies: 1
    • Forum: Member Trucks

Latest posts

Staff online

Members online

Total: 2,483 (members: 42, guests: 2,441)

Forum statistics

Threads
77,839
Messages
1,640,725
Members
80,546
Latest member
Mad mike ak
Top